Manitowoc NEO UD0310AE Specifiche Scaricare il pdf (Pagina 103)

Part Number STH042 3/14 103

Compressor Drawing Locked Rotor

The two likely causes of this are:

• Defective starting component

• Mechanically seized compressor

To determine which you have:

1. Install high and low side gauge.

2. Try to start the compressor.

3. Watch the pressures closely.

• If the pressures do not move, the compressor

is seized. Replace the compressor.

• If the pressures move, the compressor is

turning slowly and is not seized. Check the

capacitors and relay.

Compressor Drawing High Amps

The continuous amperage draw on start-up should not

be near the maximum fuse size indicated on the serial

tag.

The wiring must be correctly sized to minimize voltage

drop at compressor start-up. The voltage when the

compressor is trying to start must be within ±10% of

the nameplate voltage.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 135 136

Nessun commento

Manitowoc NEO UD0310AE Specifiche Pagina 103